Eagle One PRO | P-Setting Instructions

1. Long press the "+" and "-" button at the same time to access the P-setting menu.

2. Press the Power button to toggle through P-Settings.

3. Use the "+" or "-" button to adjust the value.

4. To save settings, allow the LCD display to timeout (8 seconds) or long-press the "+" and "-" buttons together to exit the menu (2 seconds).

Most of them are version 23, which you can determine from P03. If P03 is the version that adjusts the speedometer units, which is the V23.

Setting	Feature (V23)	Notes
P00	Rim size (do not adjust)	Default: 11
P01	Battery voltage (do not adjust)	Default: 60V
P02	The number of magnetic poles (do not adjust)	Default: 30
P03	Speedometer units	0: kph 1: mph Default: 0
P04	Start mode	0: zero start 1: kick start Default: 0
P05	Cruise control	0: off 1: on Default: 0
P06	Start strength (do not adjust)	From 1-5 1: the weakest 5: the strongest
P07	Power level	From 0-80 Default: 80
P08	ABS level	From 0-2 Default: 1
P09	NFC card connect setting	From 0-2 Default: 2
P10	ODO reset	Default: 0 Select "1" to reset the ODO

 

Setting	Feature (V22)	Notes
P00	Rim size (do not adjust)	Default: 11
P01	Battery voltage (do not adjust)	Default: 60V
P02	The number of magnetic poles (do not adjust)	Default: 30
P03	Speed signal	Default: 0
P04	Speedometer units	0: kph 1: mph Default: 0
P05	Start mode	0: zero start 1: kick start Default: 0
P06	Cruise control	0: off 1: on Default: 0
P07	Start strength (do not adjust)	From 1-5 1: the weakest 5: the strongest
P08	Power level	From 0-80 Default: 80
P09	ABS level	From 0-2 Default: 1
P10	NFC card connect setting	From 0-2 Default: 2

 

Feel free to click here to contact us if any questions!