Phone: (415) 800 3848Email: info@varlascooter.com

Varla Eagle One Unboxing And Assembly Introduction

Hi, everyone! We're so glad that you are interested in our Varla electric scooter.

We will introduce how to assemble and how to use it in the following.

Let’s read on and know Varla scooter more!

 

 

 

 

The first thing you need to do is cut the belt and open the box. It contains assembly tool, charger, 4 motor screw caps and Varla Eagle One.

If you purchase right now and you’ll get a set of protective gear and 4 pcs stickers as gift.

PART. 1 Assembly

Let’s begin the assembly.

STEP 1

Unlock the clamp, lift up the main rod, and lock the clamp. Please make sure the safety lock slip down the bottom and the clamp on the proper position.

STEP 2

Install the handlebar, remove the four screws from the stem ensuring that the alignment markings on the handlebars are centered and the handlebars are adjusted to a comfortable position. Last, tighten the screws with the tool.

STEP 3

Adjust the LCD display, brake, bell and Single/Dual motor switch to a comfortable position, then tighten the screws with the tool.

STEP 4

Take out the key, insert it into the keyhole.

STEP 5

The last step, cover the motor screw caps to protect them.

Now, your Varla Eagle one scooter is fully assembled!

 

PART. 2 How to use

Let’s see how to use it.

  • Turn the key to the right and press the switch button for 3 seconds to turn on the LCD display.  
  • When the power is on, press the “Mode” button to change the gear from 1 to 3.
  • Long press the “Mode” button, the front light will on.

 

  • Pull the brake and the front & rear braking lights will light up.

 

  • Press the switch to change single or dual drive.

 

  • When you charge the scooter, connect the cable and the charging hole first, then plug in the socket power. Varla Eagle One has 2 charging ports, you can use them at the same time.

 

Now, believe you have known how to use it.

Before you ride, please read the owner’s manual. It contains important details related to safety and maintenance. It will help you a lot!

 

PART. 3 Feature

Varla is an all-terrain electric scooter, in addition to commuting, it is also suitable for the outdoor off-road adventure. Why could out scooter make it? Let’s see in details!

 

Motor

Varla Eagle One with dual motor, 1000W each. The Dual 1000W hub motors provides a nominal total power output of 2000W and a peak power output of 3200W. You can easily tackle ramps with up to 30 degree inclines.

 

Brake

Varla scooter adopts dual disc brakes, it can greatly shorten braking distance, and the braking performance is more stable in both wet and dry conditions. Especially, Varla scooter is equipped with ABS (Anti-Lock Braking System), which can greatly avoid the wheel lockup situation.

 

Shock Absorption

With dual shock absorption, Varla scooter adopts independent suspension for extra. It can keep the center of gravity of the scooter and rider stable, keep the tires in contact with the road, absorb bumps and let you ride as smooth as butter.

 

Tire

Varla electric scooter adopts 10"x3" pneumatic tires, which can absorb the unevenness of terrain, it will bring you more comfortable riding experience when you go off-road adventure.

 

Battery

Varla scooter is equipped with 52V /18.2Ah lithium-ion battery, it can reach 40 miles every fully charge, which can totally meet your daily commuting needs and accompany you go outside for all day long!

 

OK, that’s all. Hope it could help you!

Now is the best season to go outside, if you have already prepared, let’s go with Varla Eagle One, conquer all terrains!

Welcome to share your Varla scooter riding experience with us, we have a mysterious gift for you! 

If you have any questions, feel free to contact us!  

Leave a comment

Please note, comments must be approved before they are published